Table of Content

Overview


Home Screen


Charging Screen


Map Screen


Vehicle Health Screen


Overview

Your Lucid Air mobile app is an extension of your Lucid Air ownership experience. Use the app to monitor your vehicle, adjust controls, or ready your car for a trip.

These are some things you can do with the mobile app:

  • Locate the vehicle's precise location using maps. See Map Screen.
  • Control the trunk, front trunk, door locks, and charge port door remotely.
  • Adjust the cabin temperature, or turn on the defrost to get your car ready to go.
  • Flash the lights, or honk the horn to locate your car in a crowded parking area.
  • Start an OTA update.
  • Check your vehicle battery level and get charging updates.
  • Control certain car features with your Apple watch. See Apple Watch.
  • Find charging stations, destinations, or trip routes and send directions to the in-car navigation. See Charging Screen.
  • Access and view your car’s Owner’s Manual.

Using the Mobile App

Follow the below steps to download and use the Lucid mobile app.

  1. Download the Lucid mobile app to your phone from the app store.
  2. Login to the app with your credentials.
    Note: Your credentials will be available at the time of vehicle purchase. Contact customer care for more information.
  3. To pair your app with your vehicle, see Creating a User Profile.
  4. Switch on your phone’s Bluetooth and ensure that you are in a Wi-Fi zone.
Ensure that you are in an area with active cellular service to allow the mobile app to communicate with your vehicle.
Note: Lucid recommends that you have a physical key readily accessible if parking in an area with limited/absent cellular service.
Note: Your vehicle does not support the use of third-party applications to connect.

Home Screen

Home Screen Overview

The following buttons at the bottom of the home screen are present on all screens of the mobile app:
  1. Main Menu

    Lets you access the items on the main menu of your app.

  2. Vehicle Name

    The name used in the profile will be displayed here.

    If the app is used to control more than one vehicle, pressing the vehicle name will display a drop-down list of available vehicles. Select the vehicle you wish to control with this app.

  3. Mobile Key

    Use this button to link a new mobile key.



  1. Open / Close Charge Port Door

    If the charge port door is closed, pressing this button will open it. If the charge port door is open, pressing this button will close it. If a charge cable is connected to the vehicle, pressing the button will have no affect.

  2. Open / Close Front Trunk

    If the front trunk is closed, pressing this button will open it. If the front trunk is open, pressing this button will close it.

  3. Door Locks

    If the doors are locked, pressing this button will unlock them. If the doors are unlocked, pressing this button will lock them. You must confirm the unlock command before the doors unlock.

  4. Open / Close Trunk

    If the trunk is closed, pressing this button will open it. If the trunk is open, pressing this button will close it.

  5. Cabin Preconditioning

    Press this button to preheat or pre-cool the cabin, by setting the target cabin temperature. If the target temperature is lower than the interior temperature, the air conditioner will be used. If the target temperature is higher than the interior temperature, the heater will be used. Use the + or - buttons by the temperature setting to raise or lower the desired temperature. Pressing the TURN ON button will activate the operation. Pressing TURN OFF will cancel the operation.

    The windshield defroster can also controlled from this screen. Pressing the DEFROST button starts the windshield defroster. Pressing DEFROST again, or pressing TURN OFF will cancel the defroster.

    To close the Cabin Preconditioning window, press the X in the upper left corner. Closing this window will not affect the status of the cabin preset operations.

  6. Flash Lights

    Pressing this button will flash the headlights and taillights. This is useful in finding your vehicle in a crowded parking lot.

  7. Honk Horn

    Press this button to honk the vehicle's horn. This is useful when you desire to draw attention to the vehicle.

Charging Screen

Open the charging screen using the on your app. You can set the charge limit using the scroll button as per your driving preference.

Lucid Mobile App also allows you to select charger ID and activate it if the Plug & Charge fails.

Note: Do not use Electrify America's app to activate the Plug & Charge.

Map Screen

Lucid Mobile App shows charging stations available around your vehicle. You can toggle between 2D, satellite map, and range spider. You can also perform a search using the search option.

Using the pull-up menu, you can check for real-time station charger availability. The Lucid app allows you to send directions with EV charging stops to the car.

Vehicle Health Screen

Accessing the Vehicle Health screen

  1. Log into the Lucid Mobile app.
  2. Click the icon .

The following information is displayed:



  • Tire pressure of all four tires
  • Software updates available for your vehicle. Tap to see applicable warnings and start installing updates remotely.
    Note: You can get the software updates via your Wi-Fi or cellular provider.
  • View your vehicle Odometer readings
  • Vehicle Identification Number (VIN) of your vehicle