Table of Content

Temperature Control


Defrost


Max Cool


Temperature Control

Cabin heating, ventilation, and air conditioning is divided into four zones: The driver and passenger side in front, and the left and right sides in the rear. These zones can be simultaneously or individually adjusted using the Pilot Panel, the rear center console display, or the buttons on the dash.

Note: The Lucid Gravity uses a heat pump for climate control. When operating cabin cooling or heating, you may hear some faint electrical motor sounds. This is normal.

Pilot Panel Climate Controls

On the bottom of the Pilot Panel, press . Press FRONT or REAR to access the controls for those zones. Use the sliding bars to adjust the temperature and fan speed for that zone. Slide the bar all the way down to turn the fan off.

Press this button to power climate zones on or off.

In the FRONT panel, this controls all zones, front and rear. In the REAR panel, this controls only the rear zones.

Press this button to turn air conditioning on or off.
Press this button to turn Maximum Cooling on or off.
Press this button to switch between air circulation modes. Cabin air can be continuously recirculated, or a blend of fresh and cool air can be drawn from outside.
Note: Avoid recirculating cool interior air for extended periods, as this can fog up the windows.
Press this button to defrost the front windshield; See Windshield Defrost
Press this button to defrost the rear window and side-view mirrors; See Windshield Defrost
Press this button to open the Settings menu.

Auto-conditioning the seats and steering wheel can be toggled on or off via this menu.

Press this button for the system to automate zone fan speed and vent modes based on the set temperature.
Press this button to synchronize all climate control states with the driver zone: temperature value, fan speed value, and vent modes.
Note: SYNC will turn off if a passenger adjusts a control while it is on. The control settings for the other zones remain as they were previously set in SYNC.
Press these buttons to turn the fan for that area on or off.

Multiple areas can be simultaneously selected.

Front Temperature Control Buttons

Buttons on the dashboard under the Pilot Panel can adjust the temperature and fan speed for the driver and front passenger. Move a button up or down once to change the temperature or fan speed by ±1 increment. Press and hold the toggle to raise or lower by multiple increments.

The Right Clearview Cockpit will open a small peek window along the bottom of the display when using the temperature control buttons. This window displays the current temperature and fan settings and updates according to the control interactions. Changed settings will be highlighted.

Note: The peek window will disappear after either a few seconds of inactivity or if you touch or swipe anywhere on the screen to dismiss it sooner.

Remote Climate

Remote Climate is available within the Lucid mobile app and allows you to remotely set the cabin temperature or windshield defrosting controls.

Note: Any changes to the temperature controls via the Pilot Panel will cancel the feature when Remote Climate is activated.

Defrost

Windshield Defrost

Press the icon on the Left Clearview Cockpit or from the Pilot Panel screen to defrost the windshield. Note that the icon will highlight when activated.

The heat and fan speed will switch to high settings once pressed, and the air flow will be directed through the vents at the base of the windshield.

Note: Any changes to the temperature controls via the Pilot Panel will cancel the feature when front defrost is activated.
Note: Opening the hood will cancel the feature when front defrost is activated.

Rear Window Defrost

Press the icon on the Left Clearview Cockpit or the Pilot Panel screen to activate the rear window defroster. The icon will highlight when activated.

The defroster will automatically turn off after approximately 15 minutes.

Max Cool

Max Cool enables occupants to activate maximum cooling in the cabin with just one press. It rapidly cools down the vehicle cabin in hot conditions.

Max Cool overrides the fan and temperature control settings. The fan speed is set to maximum and the temperature to the coolest. Ventilation of occupied front seats is set to maximum.

Max Cool ON

Select Climate on the Pilot Panel and select . When activated, the icon is highlighted and the HVAC controls are updated to indicate maximum cooling.

Max Cool OFF

Select the Max Cool button again to turn it off. When turned off, all HVAC settings revert to the previous state.

Note: If you change the temperature or fan speed in any zone, the Max Cool turns off.