Mobile Key allows you to use your phone to unlock, drive, and lock Lucid Air using the Lucid Mobile app. In order to use the Mobile Key, you must first pair it with the vehicle.

Pairing

You must pair the mobile device in order to access the Mobile Key functions.

1. On the Pilot Panel:
   1. Go to Settings > Access and Profiles > Keys.
   2. Press Link Mobile Key.
2. On your mobile device:
   1. Open the Lucid Mobile app.
   2. Press the Mobile Key icon in the top right-hand corner of the home screen.
   3. Press Link Now.
   4. Wait for the 6-digit passcode.
3. Confirm that the 6-digit passcode on the Pilot Panel matches the mobile device code.
4. Type a name for the mobile device on the Pilot Panel, and press Done.

Unpairing

You can unpair mobile devices either from within the Settings in the vehicle or from the mobile device. Once unpaired, you will not be able to use the mobile device for Mobile Key functions.

Unpairing from the Settings App

1. Go to Settings > Access and Profiles > Keys.
2. Press Edit.
3. Press Remove next to the mobile device to be unpaired.

Unpairing from the Lucid Mobile App

1. Press the Mobile Key icon in the top right-hand corner of the home screen.
2. Press Remove Vehicle.
3. Go to your device's Bluetooth settings, navigate to the list of Bluetooth devices, and tap Forget for the vehicle. Depending on the OS, select Forget or Unpair to unpair your Android device. To unpair the iOS device, tap and click Forget this device. You can refer to the Lucid Mobile app for additional information on the Troubleshooting modal.

Vehicle Controls

Mobile Key controls, (unlock, drive, and lock), function the same way as the passive features for the key fob.

Your vehicle includes two alternate keyless entry systems: a key fob and a Lucid key card.

Key Fob Range

The key fob communicates with receivers in the vehicle via Bluetooth® Low Energy (LE) and low-frequency radio communication. While it is not necessary to point your key fob at the car, it must be within operating range to work.

You can manually operate the key fob once it is detected or closer to the vehicle.

While carrying a key fob, all doors will automatically unlock and present their handles when approaching your vehicle.

When leaving your vehicle while carrying a key fob, all doors will automatically lock, and any presented door handles will retract.

Key Fob Operation

As you approach the vehicle, the key fob should be within range.

Once within range, the key fob operates as follows:

• Press once to lock all doors and front and rear trunks.
• Press twice to unlock all doors and front and rear trunks.
• Press and hold the button to open or close the front trunk.
• Give it a short press, followed by a long press to open or close the rear trunk.
• Press the button four times for the panic alarm to trigger; to cancel the panic alarm, press the button four times again or twice to unlock it.

Key Fob Troubleshooting

If the key fob does not respond when pressed:

• Try operating the key fob as close to your vehicle as possible. Other radio equipment operating on a similar frequency may interfere with the signals from your key fob.
• The key fob battery may need replacing; see Replacing the Key Fob Battery. If the key fob battery is depleted, you can still unlock the vehicle by holding the key fob near the driver's side center pillar, (below the camera; the key fob should touch the pillar), then pressing the door handle for three seconds.

If you cannot unlock your vehicle with the key fob, use the mobile app or Lucid key card. See Using the Lucid key card. Contact Lucid Customer Care if the problem persists.

Use the Lucid key card only within close range of the vehicle and as a backup method for vehicle entry. You may use or lend the Lucid key card when you are:

• Using a valet parking service
• Leaving your vehicle to be serviced or repaired at a Lucid Service Center
• Experiencing key fob issues, (e.g., misplaced or low battery)

Hold the Lucid key card just above the driver's side center pillar camera to lock or unlock the doors.

The key fob battery is type CR2032 and will need occasional replacement. The vehicle alerts you with a Key Fob Battery Low message on the Glass Cockpit.

To replace the key fob battery:

1. Remove the battery cover.

   
   
   

2. Remove the old battery.

   
   
   

3. Avoid touching the flat surfaces of the new battery, if possible, as fingermarks can reduce battery life.
4. Wipe the battery clean before installation.
5. Fit the battery with the + side facing upwards.
6. Replace the battery cover.

Depleted Key Fob Battery

It is still possible to access the car even if the key fob battery is depleted. Press the driver’s side door handle momentarily and locate the camera on the B Pillar. Place the key fob on the B Pillar under the camera, and while still holding it, move the key fob in small circles.

You can also lock the vehicle in the case of a depleted key fob. To do this, make sure the doors, frunk, and trunk are closed. Then, locate the camera on the driver’s side of the B Pillar. Place the key fob on the B Pillar under the camera, and while still holding it, move the key fob in small circles.