About User Profiles

User profiles enable you to personalize your vehicle settings, including:

Preferences for Entering and Exiting the Vehicle, see Easy Entry & Exit
Seat Positioning, see Adjusting the Front Seats
Positioning of Exterior Mirrors, see Adjusting the Exterior Side Mirror Position
Certain Drive Settings, see Drive Modes
Preferences for Units of Measurement; Press Settings > General > Units
Paired Bluetooth® Phones, including Synced Contacts, Calls, and Messages, see Pairing a Bluetooth Device
Music and Audio Preferences, such as Radio Stations and Third-Party Media Applications, see Playing Media from Devices
Interior Lighting and Display Themes, see Interior Lights
Personalized Home and Work Navigation Destinations, see Navigation Overview

User Profile Types

There are two types of user profiles, both with their own level of access:

Owner: This is the main profile assigned to the owner of the vehicle. The owner profile has access to all features, including managing other user profiles. There is only one owner profile. See Creating a User Profile.
Guest: This is for any user who requires temporary access to the vehicle or a regular user who does not wish to create a profile. Guest preferences are saved to the profile for convenience but can be overwritten for a different guest user. There is only one guest profile.

Creating a User Profile

Setting up the Owner Profile

Before beginning the setup process, ensure your vehicle is connected to the internet.

An Owner Profile setup prompt will appear on the Right Clearview Cockpit in a new vehicle while the gear is in P (Park). Press START to begin the setup process.

Alternatively, press > Primary Driver, followed by START to access the setup on the Pilot Panel manually.

Note: The vehicle gear must be set to P (Park) and remain there throughout the setup process.

Note: Do not skip the first step. However, you can pause any subsequent steps by pressing EXIT SETUP and return to them later via the

> Primary Driver menu.

Sign in with your Lucid ID to allow your preferences and data to be synced to your other Lucid vehicles and the Lucid mobile app. This will allow you to access your vehicle and its data remotely.
Note: Your Lucid ID is created when you purchase your vehicle.
If you cannot locate your login information, contact Lucid Customer Care for assistance. See Contacting Lucid Motors.
Enter a 6-digit Personal Identification Number (PIN) of your choosing and enter it again to confirm.
This PIN will be used to confirm your identity instead of your password.
Enter a profile name and select an avatar.
Personalize driver adjustments by following the instructions on the Pilot Panel to set seat, steering wheel, mirror position, and other preferences.
Set up facial recognition by following the instructions on the Pilot Panel to load your profile quickly when you enter the vehicle.

Profile Settings

There are multiple ways to access your user profile settings:

Press your avatar image on the Right Clearview Cockpit, then to launch.
Press and then your profile (avatar and name) on the Pilot Panel.

Changing Profile Name and Avatar

You can change the avatar for the owner profile in the Lucid mobile app.

My Profile

You can view and edit your home and work addresses or reset your personal identification number (PIN) under My Profile.

Switching Between User Profiles

Press the current avatar image on the Right Clearview Cockpit. Then select any user profile from the list and enter the PIN, if prompted. Switching between user profiles is only available when the vehicle is in P (Park).

Factory Reset

Factory Reset is a feature that wipes all user profile data from the vehicle. A factory reset can only be performed by the primary owner.

CAUTION: A factory reset should not be used as a troubleshooting step for software issues.

Note: Performing a factory reset does not delete your Lucid ID or impact vehicle ownership. To transfer ownership of the vehicle, contact Lucid Customer Support.

Performing a Factory Reset

The following conditions must be met before attempting a factory reset:

Signed in as Primary profile
Connected Lucid ID
Vehicle charged to at least 20%
Vehicle is in Park

Navigate to the Settings > General on the Pilot Panel and scroll down to the select Factory Reset section to perform a factory reset.

You must confirm your identity by entering your password and then confirm your decision before the reset proceeds.

CAUTION: This step cannot be undone. All data will be lost forever.

You will see a series of Factory Reset in Progress screens after confirming factory reset. Factory reset will be complete and all data will be deleted when these screens disappear.

Changing Display Settings

Select > General on the Pilot Panel, then tap either Units, Time Zone, or System Language to change the Unit of Measure, Language, and Time Zone.

Keyboard Language and Input Preferences

Warning: Distracted driving can lead to serious injury or death. The driver should pay attention to the driving task at all times and use the keyboard feature only when the vehicle is not in motion and safe to do so.

The onscreen keyboard lets you enter text input on the Pilot Panel, such as search bars, user names, or passwords. Preferences are automatically saved to your profile.

Change Input Method

Use the onscreen keyboard to input text in three ways:

Alphanumeric keyboard
Swipe to type on the Alphanumeric Keyboard
Handwriting Recognition

Swipe to type

To type a word, select the first letter and then swipe across the keyboard to spell out the rest of the word. After you complete the word, lift your finger from the keyboard. The keyboard will display the closest match based on your input. You can change this by selecting the alternative word suggested at the top of the keyboard.

Handwriting Recognition

Switch to handwriting mode and start writing the word, either individual letters or the whole word.
After the word is complete, select the space bar to progress to the next word or choose an alternative word from the suggestions to select an alternative word and continue writing.

Changing Input Language

The input language defaults to the vehicle’s selected language. Change the input language when the keyboard or handwriting is open by pressing and holding the languages button.

Alternatively, tap the icon to switch between the available languages without showing the languages list. Pressing and holding the icon will show the list.

Note: You cannot change the language once you have entered characters into an input field.

Changes to the input language are saved to your profile.

Table of Content